Posted 20 hours ago

T-Cut Grey Scratch Remover Color Fast Paintwork Restorer Car Polish - 500ml plus a Wax Applicator Set with Handle * 13 Colours Available

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Regardless of what type of car paintwork you have, T-cut can be used. For some additional uses, it is suitable for our boats, caravans and around the housework. How To Use T-Cut Correctly Step 4: After rubbing until the scratch is no longer visible. You should use a second clean microfibre cloth to wipe away any remaining solution. As mentioned a couple of times through this article – there are several times where T-Cut is not the right solution. If tcut is not right for you, if the scratches are too deep or if you want expert guidance when fixing scratches to avoid any accidental damage, then this is where ChipsAway come in. T-Cut is a type of car scratch remover, that is also known as a rubbing or cutting compound. A well-known brand in the car care industry, T-Cut is used to remove light surface scratches, marks and scuffs on car paintwork. There are several different types of T-Cut available, including the original restorer fluid, rapid scratch remover, T-Cut Colour Fast, the T-Cut Scratch Magic Pen, and a T-Cut metal polish. Does T-cut actually work? The T in Tcut stands for “ Tetrosyl Cutting Oil ”. How T-Cut works What is the car scratch remover good for?

Most of the common incidents which can scratch your car, such as scraping along a low wall, kerb, brushing again another car or through an act vandalism (e.g. when cars are “keyed”) leave marks that are too deep for T-Cut to fix. Avoidable errors can hinder the effectiveness of T-Cut or even result in additional damage to the paintwork. One common mistake is applying T-Cut on unsuitable surfaces, such as matte finishes or non-metallic paintwork, leading to discoloration or accidental damage. Another error is impatience, where the product isn’t given sufficient time to penetrate the scratches before it’s buffed off. Know Your Surface If You Rush It Or Don’t Have Time For The Maintenance: As mentioned in step 4, you should always remove any excess product on the car, as it will be tough to remove any that was left over. Step 6: If you feel your whole car needs a paintwork restoration. You would have to ensure you are ready for the lengthy and strenuous task, as each section of your car would need to be treated separately. Also, it would require a more thorough after-care. The whole car would need to be waxed to prevent the paint from dulling. T-Cut Colour Fast – Removes minor scratches, scuffs and marks, all whilst adding colour, in one simple application.T-Cut Colour Fast is perfect for restoring the original colour of your car, while T-Cut Rapid Scratch Remover is a favourite for handling light scratches. If you’re dealing with metallic paintwork, then T-Cut Metallic Colour Restorer is your go-to. For those with stainless steel, Tetrosyl Cutting Oil will be your best friend. Instructions for Using T-Cut on Your Car’s Paint The T-Cut Original range is a stalwart in the car care industry, renowned for its scratch removal formulas. Originally conceived to reinstate the original colour and shine of vehicle paintwork, T-Cut products have earned a loyal following among car owners worldwide. Today, the T-Cut range includes for diverse metal surfaces: Since the top, protective layer has been removed, the car now needs to be waxed on a regular basis to prevent corrosion. Waxing is a vital step to remember, as the last thing you want to do, when removing damage from a car, leaves it vulnerable to more damage at a later date. Essentially, T-Cut is a good short-term solution, as it will primarily provide your car with a shine. Whilst also removing any light scratches or marks. But this is temporary, as the paint will eventually fade, so a longer-term solution would be a new paint job. For a car with dull and fading paintwork. When Is T-Cut Not Suitable For Use? Of course, no matter how it may not be ideal for deeper scratches, T-Cut is great for that top layer. To apply T-Cut, it is a very simple process.

From T-Cut Rapid Scratch Remover for light scratches to T-Cut Metallic Colour Restorer for metallic paintwork, the selection is abundant. Choose the one that matches your specific vehicle needs. Safety First Step 1: An important action to ensure you carry out, is to thoroughly clean and dry the area of paint you are applying the T-Cut to, or else it could potentially damage the paintwork. It is also for this reason that it is important to follow the instructions precisely when using T-Cut. When used as a one-off, T-Cut is generally speaking relatively harmless to your car; however, Since T-Cut removes the very top layer of paint from the surface of the car around the scratch, persistent use can wear the paint of your car thin. How To Prepare Your Car for T Cut T-Cut Metallic –Designed specifically to restore the colour and lustre of metallic and pearlescent car paintwork.There are other cases where applying tcut yourself, or trying to repair the scratches yourself, are not recommended. If you are unfamiliar with repairs ChipsAway specialists are experts in car scratch repair. We have a unique and fully mobile paint matching system they use means that, not only are you removing the scratch, but repainting it with the correct, precisely mixed colour and finishing it with the same lacquer seal as before. As this process restores the damaged area, there is no need for time-consuming waxing afterwards. As mentioned before, T-Cut is only really suitable for removing shallow, surface scratches from a car due to it working by removing the top layer of paint to restore a scratch. Effective use of T-Cut isn’t just about the application; it’s also about choosing the right product for your specific needs and observing safety precautions. Choosing the Right Product Next comes the application. Working in a circular motion, rub the solution over the scratched area, applying firmly to ensure it gets into the grooves of the damage (especially with coloured T Cut). In many cases, the cloth changes colour as the top layer of paint is removed. Don’t worry, that is perfectly normal although it is not the case with metallic finishes as the lacquer on these is clear.

Have you ever walked past your car and done a double-take because you’ve just noticed a scratch? And then you frantically rub over it, hoping it’s just a dirt smudge, but it remains. In fact, ChipsAway repairs all come with a lifetime guarantee, all for less hassle and cost than going to a body shop or garage. In fact, most body shops would repair a scratch by repainting the whole panel, whereas ChipsAway specialists only need to repair the small area affected – and you can keep your car for the day as ChipsAway come to you. Yes, T-Cut can be used on all paint colours. However, certain products, like T-Cut Colour Fast, come in different versions to better match a range of paint colours. How Often Should I Use T-Cut on My Car?Remember, T-Cut is not an instant fix. It requires time to penetrate the scratches and start the cleaning process. Frequently Asked Questions about Using T-Cut The frequency of using T-Cut depends on the condition of your car’s paintwork. Generally, for maintaining brilliant shine and dealing with minor scratches, T-Cut can be used every 3–6 months. Once the scratch has gone, you need to take another clean cloth and remove the excess product. Again, this can be done with circular motions, and will ensure a buffed up finish. Not to mention, through buffing any excess tcut away, you remove any potential damage from unnecessary drips. Sometimes, the first thing that will come to your mind is if you can fix it yourself. Thankfully, there are many products out there that are specifically made for removing scratches, one popular one being T-Cut. Read on to find out the details of the product, including a step-by-step guide on how to use it! What Is T-Cut Scratch Remover and what is it suitable for? Yes, T-Cut can be used to improve headlight clarity and light visibility by removing haziness from clear, plastic headlights. It can also be used on window and plastic glass to improve clarity and add shine. To do so though, ensure you buy the right version of T-Cut. Coloured versions will not help with restoring headlights, for obvious reasons. Can it remove excess lacquer?

T-Cut Polish – Removes surface oxidation, minor scratches and blemishes, whilst providing a shiny finish to your paintwork.When using T-Cut, safety should be your priority. Always ensure you’re in a well-ventilated area and wear gloves to protect your skin. Common Mistakes to Avoid A surface scratch is determined by feeling no obstruction when passing a fingernail over the mark. If an obstruction is noticed, it will be deeper than a surface scratch and this product can only help in improving the appearance of the scratch. Here at ChipsAway we are experts in car scratch repair, and we can repair scratches that tcut usually won’t touch. Our speciality is offering an affordable and convenient service that gets your car sparkling in no time. With experts positioned and poised up and down the country, we have specialists near you. Free, No-obligation Repair Estimate T-Cut Color Fast is a revolutionary coloured paintwork renovator with Variomorphic Ceramic Technology that removes light scratches*, oxidation, ingrained dirt, bugs and surface imperfections. The coloured pigments and the SiO2 molecules enriches colour, cleans, restores and polishes in one easy application, leaving a protective shine that lasts and lasts.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment