Joined in 2023 
82 
63 About this deal
A trench cover is designed for covering bores, trenches and apertures - typically during construction, maintenance and repair works. Trench covers are suitable for a variety of uses including pedestrian, domestic, residential, footpath and driveway applications. Cast iron manhole covers and outside drain covers reach a higher loading class than galvanised steel, and the stronger material allows them to be classified for higher weight loads. An F900 class cast iron manhole cover weighs 145kg and is certified to hold up to 90 tonnes of weight. Meanwhile, galvanised steel manhole covers can be used in areas with slow traffic or pedestrian traffic, as this material is not suitable for use on highways and roads. Lightweight construction makes our ground hole covers incredibly easy to use and can be manoeuvred by just two workmen with no need for heavy mechanical lifting. Recessed fixing holes makes them easy to bolt down and fit while an easy to clean surface means they can be simply wiped down when not in use. Despite being lightweight, our road plates have a high strength to weight ration with tough SMC glass-reinforced plastic that won’t warp or delaminate in adverse weather conditions. A non-trip leading edge and slip-resistant surface that exceeds HSE standards also ensure safety. LowPro 11/11 Pedestrian Board– this anti-slide pedestrian board is typically used over 700mm trench.
Designed to be manhandled this trench cover weighs only 17kg and is designed with handles for easy lifting when manoeuvring the product. With its high-density polyethylene build the cover can withstand over 400kg and has high impact resistance due to its internal build which contains high-strength steel bars. Product Features: Great choice for high traffic areas, as they're flush with the surrounding pavement and won't protrude. Manhole Covers Loading Classifications: BS EN 124 Loading Classification Trench covers are made from plastic, but unlike GRP road plates, they are a single unit and not part of a linked modular system. Unlike GRP or steel road plates, many trench covers can be lifted into place and installed by one person. Department for Transport guidance construction workers sustained non-fatal injuries in 2020/2021 – 33% of these were slip, trips and falls on the same level, according to HSE figures reported under RIDDOR.
When must hole covers be used?
Brilliant Ideas Hole Covers are made from recycled Polypropylene plastic; and because they’re non-slip, they’re safe. Bright yellow in colour, they are highly visible and slim line, reducing trip hazards. We also supply a range of steel Road Plates in different sizes. Road Plates are suitable for multiple uses and are designed to allow vehicle traffic or heavy pedestrian traffic to travel over them. Hole Covers are used widely across different sectors in construction, including main contractors, house builders, hybrid frame contractors, precast concrete manufacturers (floors/frame), installation contractors (steel/concrete frames), in-situ frame contractors, core drilling contractors, and health and safety professionals. Our patented engineered solutions have been perfected by our dedicated team of engineers, creating a range of road plates and trench covers that are all HAUC compliant. This puts them at the very forefront of road safety engineering. Added strength of the underside ribbed framework is sturdy enough to withstand the weight of vehicles
Manhole covers are an essential part of any city's infrastructure. They protect our drainage systems and provide access to below ground sewers, but they can also come in different shapes or sizes depending on what you need them for!Designed to be flush with the surrounding pavement, making them perfect for pedestrian areas. Surface boxes: Manhole covers, also known as inspection chamber covers, are a common sight in the ground, they prevent entry to drainage inspection chambers and provide access to below ground sewerage and surface water systems. These covers have a range of different applications, such as outdoor drain covers, fire hydrant surface boxes and stop tap access boxes. Our manhole covers also come in a range of different shapes and sizes, including round manhole covers for easy maneuverability. Find out more about the advantages of using round manhole covers. Manhole Covers by Product Type The Brilliant Ideas Hole Cover system is reusable and will stand the test of time. They’re strong and have been independently load tested. Construction crews and paving companies are always concerned about covering up holes in the ground while performing repairs or maintenance. This product works effectively where outside drain covers may be required. In addition, landscaping and plumbing companies can also benefit greatly from having stable and reliable units to temporarily cover holes in commercial or residential properties. Though it is lightweight, this manhole cover is very rugged and can be used for long periods of time. Additional Product Information
Anti Fatigue Mat for Special Applications - Electrostatic Discharge (ESD), Chemical, Welding and Fire Resistant This manhole cover is useful in areas where a pothole or drain cover may be required. It can also be very valuable for covering pavement defects in a car park. The hole cover can also be used on surfaces other than pavement. It serves as a great tool for covering up holes in the lawn during gardening work. Given that the product is light enough to be easily transported but sturdy enough to withstand the weight of vehicles, it has multiple uses. Who Might Use This Road Plate? LowPro 12/8– alternatively, this is an anti-slide pedestrian board which is used over a 700mm trench which comes with an infill strip.
What size hole cover do I need?
The Plastic Tuff Trench Cover is the first blow moulded trench cover on the market. Designed and manufactured in the UK, and made with Utility and Highway contractors in mind, this trench cover provides strong, durable and consistent protection for open areas on the footpath. Designed with an anti-slip pattern and anti-trip edges the trench cover can be fitted into the ground using the 4 fixing holes placed on the body, which turn the temporary trench cover into a long-lasting cover. The load test analysis on our large Hole Cover – shows 180kg (28 1/2 stone) being applied through a single heel print (90 x 80mm) over a 300mm hole, with screw fixings to each corner. A trench cover is generally used to cover bores, apertures and trenches – typically for the construction industry, or for maintenance and repair works. Trench covers can be used for both pedestrian and residential use, as well as for driveways and the construction industry. We’re proud to offer a wide range of trench covers, which include: Steel road plates can also be manufactured with an anti-skid finish. Anti-skid road plates have more grip and friction compared to standard steel road plates to protect against people or vehicles slipping in wet or muddy conditions. GRP road plates
Great Deal 
New Comment