TP-Link AX1800 Wireless Dual Band Ceiling Mount Access Point, Wi-Fi 6 , Gbps Ethernet port support 802.3at PoE+, Ultra-High Performing Enterprise Wireless for High-Density Environments(EAP620 HD)

Product Information

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty. Open Source Code For Programmers (GPL) In principle, by design, there are no distinctive features in the design of the EAP620 HD: we get used to the fact that all Wi-Fi 6 access points get very hot, so now the radiator inside is a mandatory component. Web interface

Ultra-Fast WiFi 6 Speeds:Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds. †

Omada Mesh, Seamless Roaming, Captive Portal, and Cloud Access require the use of Omada SDN controllers. Please go to https://www.tp-link.com/en/omada-mesh/product-list/ to find all the models supported by Omada mesh technology, and refer to the User Guides of Omada SDN controllers for configuration methods. During testing, I noticed that in the 5 GHz band, the access point chooses a frequency in the 5.2 GHz band, reluctantly climbing higher. Voor Seamless Roaming moeten de clients 802.11k/v ondersteunen en zijn er mogelijk extra instellingen vereist. De prestaties kunnen variëren op basis van het clientapparaat.

I hasten to note that Omada SDN is not compatible with all TP-LINK models, but most likely the following business models of the company will be able to be controlled via a soft controller, because the ability to visually monitor your network is difficult to overestimate. Moreover, Omada SDN itself builds a network topology diagram from the discovered devices.IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.3at, IEEE 802.11ac, IEEE 802.11ax, Wi-Fi CERTIFIED 6

To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.

Compare

This firmware fully adapts the Omada SDN Controller v5 but only compatible with Omada Controller v4.1.5 or above.

PoE+ Powered: Supports DC (adapter included), 802.3at PoE+, and Passive PoE for flexible installations.Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP) through Omada Cloud Based Controller, Centralized Cloud Management, and Intelligent Monitoring.