Resin Bound & Resin Bonded Gravel Bonding Resin only/for Resin Bound and Gravel Bonded driveways & Paths (7.5kg)

Product Information

Can it really be that easy? Well, as long as the instructions are followed and, absolutely critically, the correct type of aggregate is used, it genuinely is that simple. Spread the gravel, spray with the EasiHold, allow it to set, job finished. Case Study: Briefly, here is how you can care for your resin driveway so that your drive can last a very long time for you; If you’re unsure about exactly what resin bound gravel is, how long it lasts and the benefits of it, then take a look at our guide below which details everything you need to know about resin bound gravel. What is resin bound gravel? It’s this simple: you will probably need to read this twice, because you’ll believe you missed something, but it really couldn’t be any simpler.

Gravel-Lok, also known as "Gravel Glue" is a Polyurethane-based resin which when binds stones together when applied. The end result is a firm walking surface which is also permeable, allowing water to pass through. Gravel Lok Resin Bonded SurfacesSimilarly, in cold weather, the ground and air temperature will fall and resin curing times will lengthen significantly and in the case of UV-stable resin, may not cure at all until the temperature of the laid mix reaches a minimum of 5 oC. SUDwell™ is the specialist in the supply and installation of large areas of resin bonded gravel, or resin driveways. We have installed resin bounded gravel paving all over the UK for both commercial and private residents. SUDwell™ is also the number one supplier of resin driveways London.

Because no sub base is required this saves alot of time, effort and money, making our system cheaper and more practical than a typical resin bound installation. GravelHold can be applied in three ways, Pour-On, Spray-On or Hand Mix, which one you choose depends on how you plan to use the gravel surfaces. Here are the most common uses and the recommended technique to ensure our pour on gravel binder can perform perfectly for your intended use: PolyPlay For the brightest play areas and the most colourful sand pits, this play sand is soft, safe, and sets the scene for hours of fun. If you do not have existing gravel we can supply prepared clean and dry gravel in a wide range of colours.

3. Gather Your Tools

However, if your project is on a smaller scale, and you are able to, we would highly advise you to use our DIY Kits to do the job yourself. This will keep costs down for you and you will have all the help and support you may need along the way. They have a low maintenance requirement. They do not need constant surface resealing as with a concrete driveway. They are also resistant to weed growth and you need only a stiff brush to get rid of debris on the surface. No prior experience is needed to install Our SUDwell™ Resin Bound Kits. All our kits are easy to install and will transform your old and tired looking existing driveway, path or patio. You will be left with a new modern, desirable and functional area. You also get the added benefit of pride and satisfaction of enjoying something that you created. What Our Customers Say

Forced Action Mixers The SoRoTo range of forced action mixers offers machines which can mix up to 12 bags of gravel in each mix. Designed and built in Denmark. Resin has to be spread at 20 meters per hour to make sure it goes down properly. This is because of the curing time for resin. If it’s done any slower or done in stages, it goes off. Resin driveway cost per m 2 Gravel Bonding Resin is a two part epoxy resin specifically formulated for use as an aggregate bonding material for driveways and pathsSold on the idea of a resin bound driveway and want one for your home? We recommend getting quotes from at least three reputable installers near you. To get accurate estimates, we suggest you provide as much detail as possible, like the size and shape of your driveway, the condition of the current driveway and if it will need to be removed. Aggregates Decorative aggregates are a little different from what is classed as wet aggregates. The stone is tumbled and then graded for size. Each mix uses a combination for 2-5mm stone and 1-3mm stone.Read more… This is classed as a low-density aggregate. The aggregate is washed so that it’s clean and then kiln dried before being bagged at 25kg weight. It’s important that the stone is completely dry, as moisture will react with the resin and will result in “micro-foaming” (clouding). Never use aggregate that has visible water droplets in the bag. Aggregates vary in shape depending on the colour. Read less…