Joint It Simple Jointing Mortar Grey (1 x 20kg) - Large Size

Product Information

Approximate coverage using 4 size random paving per 20Kg tub is 12.5 sq m, depending on joint width and depth. How to Apply Joint-It Simple: Weed-Resistant Jointing Sand - YouTube Trusted by Professionals. Loved by Homeowners.

Joint-It Simple – is a ready-mixed, permeable, jointing compound that can be applied in all weathers. You need a hard and soft brush and use the mortar with water on a water-permeable surface to get the best result. Ready to use deep cleaning solution that works on a wide range of outdoor surfaces, keep your patio, garden path and driveway looking their best all year round. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes Joint-It Simple can only be used where there is a permeable base. We recommend a 6:1 sand and cement base. If you are unsure if your base is permeable, run a hose for several minutes on the top of the paving. If the water drains through the joints after about 5 minutes, then the base is permeable. If the water logs on the top, then the base is not permeable.

Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes Ensure the joints, all of the joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm up to 25mm is recommended. Every Joint-It product is formulated to deliver a professional quality result, whether that’s to joint, clean, seal or enhance the colour of your natural stone or concrete paving. Joint-It Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone.

Joint-It Simple can be applied even when it’s raining or wet. Instead of waiting until the rainy months have passed to finish jointing a patio, use our paving grout to get the job done sooner. Joint-It is a brush in Resin Paving Jointing Compound for jointing paving slabs, cobbles & Natural Stone. A cancellation request by the consumer must be put in writing to [email protected] and received by the Company within the 7 working day period. All outdoor surfaces require some maintenance when exposed to the changing weather conditions and foot/vehicle traffic. We recommend cleaning your patio and joints with Joint-It So Clean or Joint-It Algae Remover every 3 to 4 months to keep it looking new. If a power washer is required, we recommend no more than 1500 PSI or 100 Bar water pressure, using a standard spray jet and not a turbo spinner. This will depend on how shaded your area is and how many overhanging plants there are. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results. How to use Joint-It Simple, watch the video below for assistance and follow the instructions below and on the outside of each tub:-Ready to use from the tub, no mixing, no second part to stir in, just open and use, simply brush in. Approximate coverage using 4 size random paving per 20kg tub is 10 -12 sq m, depending on joint width and depth or for more accurate calculation please use the handy joint IT calculator When applying Joint-It Simple, take care to use plenty of water and remove all excess product from the top of the slabs at the end of the application.

Joint-It Simple must be used on a permeable base. This is to allow water to drain through instead of logging on the top of your slabs. We recommend a 6:1 sand and cement base. Add more water: Add more water sparingly to help Joint-It flow into joints of the paving, working diagonally across the joints to ensure Joint-It has penetrated all joints of the paving. Description Joint-It Simple 12.5KG Available In 4 Colours (select in the drop down menu) – new for this season! The Coverage:A 20kg tub will cover approximately 12-15m2 of paving. You can use a calculator here: https://jointit.com/uk-en/product-calculator/Work In: Using a squeegee or street broom, spread it evenly. Work in so that it goes deep into the joints and is compacted. Traditional sand and cement methods of pointing are extremely time consuming and laborious. This simple to use, sweep-in jointing grout gets the job finished faster and stands the test of time. Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt.

Failing to comply with this maintenance plan will lead to moss growing in the joints. If you leave it too long to apply an algae remover, the plant will likely have rooted deeply into your driveway gripping the jointing material. If this happens, we recommend power washing your driveway, applying a weed killer, and then reapplying Joint-It Fine approximately 10 days later. All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean every 3 to 4 months to keep it looking new. This will depend on how shaded your area is and how many overhanging plants there are. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results. Joint-It Dark Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. Unlike polymeric sand, our paver sand does not cause any hazing on slabs. We know that this is a major problem with polysand, and that is why we designed an excellent solution. Our product also doesn’t create any dust. There is no need to compromise your health by working with toxic chemicals in other jointing sands. Our natural, eco-friendly formula makes working safer for you and kinder on the environment. Our Joint-It Experts Top Tips! Final Cleaning: Clean the surface carefully with a fine hair broom so that all JOINT-IT residue is removed. Always sweep diagonally across joint.

You may also like…

Take care not to brush the product out of joints or into nearby drains. JOINT-IT will start to harden in joints within 90 minutes at over 20 C degrees. In lower temperatures JOINT-IT will take longer to harden. Once bag is opened, contents must be used within 4 hours. Joint-It Simple – can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles.