Fujifilm NP-W126S Lithium-Ion Battery for X-Pro1, X-E1, X-M1, X-A1

Product Information

Note: Battery endurance varies with battery charge level and the figures given above are not guaranteed. Battery endurance will decline at low temperatures. The FX1 charger will report the correct temperature of a thermistor equipped battery, but it does not terminate charging if the battery goes outside the 0°C to 45°C allowable charging temperature range. The user needs to stop the charging process if they notice that the temperature display is approaching the 45°C charge temperature limit." This battery is made of top materials of Lithiumion cells that have been safely certified by RoHS, CE, FCC and tested through repeated simulated work and commissioning before they are shipped from the factory. On the other hand, its specifications are based on the original standards such as appearance, interface type, body size, capacity, voltage, charging current and voltage, etc. Is it real Fujifilm NP-W126S compatibility information? If the new batteries have the required circuitry to accurately display the level in % I'm all about that.

Apparently the cheapest aftermarket batteries fail pretty bad, but fortunately many brands offer pretty solid competitors to the original batteries. They often have almost the same capacities and also heat management under a heavy load seems to be alright. When I recently got myself an X100V I was also looking for a fitting charger and in the end went with the Nitecore FX1. The company has many years of experience when it comes to charging these kinds of batteries thanks to their highly regarded flashlights. I also used my thermal camera, Flir One for Android ( iOS version exists too), to capture batteries after a heavy load. While the original battery shows mostly evenly distributed heat on its surface, the noname battery has much higher temperature in a smaller rectangle in the middle. This might be the reason for swelling of some batteries. Self-dischargingFujifilm X-A1, X-A20, X-A2, X-A5, X-E1, X-E3, X-E2S, X-E2, X-M1, X-H1, X-Pro2, X-Pro2, X-T10, X-T100, X-T2, X-T20, X-T3, X-T30 and X100F I don't think you will see any difference in the X-Pro2 because it was not designed to be take advantage of the features of the NP-W126s. For all versions of Fuji X ILCs except for the X-T2, the NP-W126 or the NP-W126s is the correct battery to use. For the X-T2, the NP-W126 will work if you don't use 4K video. Highly respected 3rd Party batteries like Watson and Patona, quote capacities that are very similar to the OEM battery’s capacity. My own experience, and that of many others, is that the best 3rd Party batteries can deliver a capacity similar to the OEM batteries Watson and Green Extreme have performance pretty much on par with the original batteries and cost roughly a third of them. They are currently available only the US. The Duracell multi-fit camera battery provides long-lasting lithium-ion power for a range of camera makes and models, allowing hundreds of photos to be taken on a single charge.

If you want the ultimate performance or you do a lot of 4K video recording or continuous shooting, NP-W126S is clearly the winner. That said, some of the third party batteries are very close to the Fujifilm’s original in performance, while they cost only a fraction of the price. We are a manufacturer representative and wholesaler that specializes in Laptop Batteries,Laptop AC Adapters.Usualy, I Don't shoot video so until I bought a generic NP-W126S, I will use a NP-W126 when NP-W126S will be discharged…. Autofocus system: Intelligent hybrid AF (TTL contrast-detect/phase-detection AF) with AF-assist illuminator As used by the Fuji X-T2, X-Pro2, X-T10, X-E2S, X-A2, HS50EXR, HS33EXR and HS30EXR digital camera models.