7m DIY Aluminium Scaffold Tower/Towers

Product Information

Extremely compact in storage and transport - just 2m (4m & 5m models) or 2.2m (6m & 7m) long by 68cm wide, therefore will fit comfortably into an estate car or small van. Scaffold towers are for sale in both steel and aluminium and are essential for painting, re-pointing and maintenance work both inside and outside the house. Your Long Established Supplier Marine grade plywood platforms employed, sealed and tested for up to 72 hours under boiling water. Non-slip surface for sure-footing.

DIY Scaffold Tower - Home Master Aluminium Towers - Quick

Directional“Tilt and Glide” wheels includedfor ease of movement after the tower is erected. This is recommended forSDIY 5 (3 in ONE)working height tower or lower. Tower uprights have a "ribbed " non-slip profile for extra safety when climbing or erecting/dismantling the towerStabiliser bars fitted to each end of the tower give a large footprint to deliver the greatest possible stability when in use Available with toeboard and additional guard rails at intermediate platform levels making these the safest DIY towers in the marketplace. The tower is always climbed internally – ‘Through The Trapdoor’(3T compliant) which is then lowered to form part of the platform. What you see is what you get with our tower range- often you have to pay extra for platforms, wheels etc. with inferior, steel alternatives. Some even have unsafe/unfixed scaffold boards to stand on

Feefo BPS Access Solutions Reviews | http://www - Feefo

Fully welded frame structure, normally only ever seen on more expensive industrial towers, for supreme strength and therefore safety and durability Assembly is pretty straightforward, even though the instructions could be a lot better. Still, with the help of mate, it didn’t take me long to get it set up. All the components were of a high quality, and there were no issues with anything being misaligned, rusted, etc. Although, I have to say that some of the edges were pretty sharp, so I’d advise grabbing a sander and going over them before building the scaffold for the first time. Horizontal & Diagonal Braces fit to the OUTSIDE of the tower frames giving more standing room on the platform. Beware of some other “Super” DIY Towers that have braces connected to the ladder frames, as this will have a serious impact on the working space available. Whilst this is not obvious when first looking, it will be an issue when working on the tower - we have seen this for ourselves! Designed and manufactured by a fully accreditedISO 9001: 2015 manufacturer, the same as ourBSI Kitemarked Towers.For large scale home DIY jobs like decorating, pruning your trees and washing your windows, a ladder may not always be the best choice. A DIY scaffold tower will offer you more freedom of movement to carry out a task which is especially important if you need to be at height for a longer period of time. Platform can be set in increments of 300mm /12" giving superb flexibility and providing comfortable working over a variety of heights Our aluminium towers use the 3T (Through The Trapdoor) method. 3T offers safe and secure access to the platform through a trapdoor. You climb the built-in ladder system from inside the frame of the tower. You reach the work platform internally and in stages.3T prevents you from climbing up the outside of the scaffolding, which could result in a fall from a height. Able to be used at different heights, with a maximum platform height of 4.73 metres, Tubesca’s tower scaffold is just the thing to help you clean out those gutters without risking life and limb.

DIY Scaffold Tower - Home Master Aluminium Towers - Quick DIY Scaffold Tower - Home Master Aluminium Towers - Quick

Designed and manufactured by a fully accredited ISO 9001: 2015 manufacturer, the same as our TUV Towers. Superdrug adds new 'VIP Rewards' offers to its existing loyalty scheme – here's what you need to know All 1 metre frames from top to bottom making these towers extremely easy to erect and dismantle by one person, transport and store. towers come fully loaded with an additional trapdoor platform, further braces and handrails and 4 large telescopic outriggers. These 2 sizes are ideal for decorating the outside of most two storey homes Beauty Advent calendars are significantly pricier than chocolate ones, but they've become increasingly popular in the last few years as a way of bagging beauty products at a fraction of the normal cost. They often sell out early, but can also be heavily discounted later if they don't, so here's a round-up of some of the best I’ve seen.Directional “Tilt and Glide” wheels included for ease of movement after the tower is erected. This is recommended for SDIY 5 (3 in ONE) working height tower or lower. FREE stabilizer bars supplied as standard. Advanced Guard Railingfor extra safety, adding to speed of installation and dismantling at working platform level. All thisincluded FREE! Despite its lightweight nature, the Home Master tower scaffold can handle up to 150kg, due in no small part to the high-quality welds found throughout, and the wide base stabiliser bars. Stability equals safety and is not something to take for granted. Also, not to be taken at face value, is that these products come safe to use. In fact, with some DIY tower scaffolds, a lot of the most invaluable safety components are sold separately such as stabilisers, and even full safety kits. I would always recommend that you tie in to the building that you’re working on anyway, just to be sure, especially if you’re going to be working on a 6-7-metre-tall rig, as they can still wobble at the top, even with stabilisers in place. Material Industrial scaffold towers supplied by Toptower are fully compliant with the latest health and safety regulations and guidelines issued by the health and safety executive using the 3T (through the trap) or advanced guard rail method of assembly.Toptower can also arrange for your work force to be PASMA trained with the ability to organise training courses nationally. Bespoke Service